View topic - Toshiba MK6465gsxn 2.5" drive

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Toshiba MK6465gsxn 2.5" drive

Page 1 of 1

[ 5 posts ]

Previous topic | Next topic

Author

Message

BrayTech

Post subject: Toshiba MK6465gsxn 2.5" drive

Posted: September 4th, 2012, 15:42

Joined: January 5th, 2012, 19:51
Posts: 8
Location: Indianapolis

I had a drive with electronics failing per atola device. I acquired a donor. I tested the donor and it passed diags. I transferred the ic602 chip to the replacement board via air solder station. When I fired up the transferred board, the drive no longer spins. I moved the ic602 chip back to the original board and get the same results. Is there fuse on this board? any advice would be apprecialted!

Top

labtech

Post subject: Re: Toshiba MK6465gsxn 2.5" drive

Posted: September 4th, 2012, 18:40

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

BrayTech wrote:

I moved the ic602 chip back to the original board and get the same results.

Do you mean you moved the donor's IC602 back to the donor's board and no longer spinning the donor drive?

Did anything happen with the ROM? Any of the contacts (legs) broke?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

BGman

Post subject: Re: Toshiba MK6465gsxn 2.5" drive

Posted: September 5th, 2012, 5:02

Joined: September 30th, 2005, 7:33
Posts: 849

First of all you should use terminal to decide whether PCB is good or bad and whether Flash is OK.

Top

Nick_CT

Post subject: Re: Toshiba MK6465gsxn 2.5" drive

Posted: September 5th, 2012, 5:16

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa

Are you soldering skills up to the job?

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town

Top

Alexii

Post subject: Re: Toshiba MK6465gsxn 2.5" drive

Posted: September 7th, 2012, 14:38

Joined: October 28th, 2009, 14:35
Posts: 775
Location: Toronto

its very easy to kill em 2.5 boards by overheating.

Top

Page 1 of 1

[ 5 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 61 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum