Hi everyone,

Another Seagate died. Terminal input below. Does not let into prompt. Ideas on whether this could be fixed without specialist tools? Normal electronics stuff and programming is OK, but I have not worked on failed hard drives before.

Thanks in advance!

---


Boot 0x40M
Spin Up
TCC-0024[0x00026F7C][0x000273E8][0x00027854]
Trans.

Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-0024
(P) SATA Reset

MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
MCMainPOR: MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 0A61
Nonvolatile MCMT sequence number 0000280A
[RSRS] 07EC
ProcessRWError -Read- at LBA 0000000000066CE9 Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 0000000000066CE9!

Reconstruction: Completed 1:
[MCMTWS]
Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-0024
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE

Those reboots were made by you or by the drive itself?

That was the raw output after plugging in the drive.

And what about noises? Do you ear the regular noises or any strange noises?