View topic - ST500DM002 BUSY

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST500DM002 BUSY

Page 1 of 1

[ 15 posts ]

Previous topic | Next topic

Author

Message

sempre

Post subject: ST500DM002 BUSY

Posted: May 22nd, 2014, 8:42

Joined: October 14th, 2005, 9:26
Posts: 1060

HELLO!
Not access terminal...

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Busy 100%, rpm ok, not sound (clicks, clicks)...

??

_________________
Нет ничего невозможного

Top

Nick_CT

Post subject: Re: ST500DM002 BUSY

Posted: May 22nd, 2014, 16:37

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa

Short read channel on PCB for starters

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town

Top

longlife

Post subject: Re: ST500DM002 BUSY

Posted: May 23rd, 2014, 12:29

Joined: December 9th, 2010, 2:59
Posts: 241
Location: kolkata

How to short??????

Top

sempre

Post subject: Re: ST500DM002 BUSY

Posted: May 23rd, 2014, 14:26

Joined: October 14th, 2005, 9:26
Posts: 1060

Nick_CT wrote:

Short read channel on PCB for starters

Yes short channel pcb...

Sorry, not access terminal...

Is bad heads?

_________________
Нет ничего невозможного

Top

sempre

Post subject: Re: ST500DM002 BUSY

Posted: June 10th, 2014, 9:17

Joined: October 14th, 2005, 9:26
Posts: 1060

sempre wrote:

Nick_CT wrote:

Short read channel on PCB for starters

Yes short channel pcb...

Sorry, not access terminal...

Is bad heads?

Swap heads... is busy ....
log terminal

Boot 0x10M
Spin Up
RECOV Servo Op=0100 Resp=0005[0x00000000][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
RECOV Servo Op=0900 Resp=0005
RECOV Servo Op=0600 Resp=0005
RECOV Servo Op=0055 Resp=0005
RECOV Servo Op=0165 Resp=0005
RECOV Servo Op=0055 Resp=0005
RECOV Servo Op=0165 Resp=0005
RECOV Servo Op=0065 Resp=0005
RECOV Servo Op=0165 Resp=0005
RECOV Servo Op=0055 Resp=0005
(P) SATA Reset

?

_________________
Нет ничего невозможного

Top

labtech

Post subject: Re: ST500DM002 BUSY

Posted: June 10th, 2014, 16:34

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Be patient

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

sempre

Post subject: Re: ST500DM002 BUSY

Posted: June 10th, 2014, 16:44

Joined: October 14th, 2005, 9:26
Posts: 1060

labtech wrote:

Be patient

SOLVED!

HEADS ORIGIANAIS...

_________________
Нет ничего невозможного

Top

sempre

Post subject: Re: ST500DM002 BUSY

Posted: June 11th, 2014, 8:15

Joined: October 14th, 2005, 9:26
Posts: 1060

longlife wrote:

How to short??????

yes!!

_________________
Нет ничего невозможного

Top

Madoka

Post subject: Re: ST500DM002 BUSY

Posted: June 11th, 2014, 8:36

Joined: June 3rd, 2014, 14:18
Posts: 79
Location: Mitakihara - Japan

sempre wrote:

labtech wrote:

Be patient

SOLVED!

HEADS ORIGIANAIS...

I'm very sorry but i'm having a hard time trying to understand your posts.

Can you please elaborate on how did you manage to solve the problem with the drive ?

Top

longlife

Post subject: Re: ST500DM002 BUSY

Posted: June 11th, 2014, 9:01

Joined: December 9th, 2010, 2:59
Posts: 241
Location: kolkata

Any kindhearted expert, please explain in what is written in this thread.

Top

Dmitri

Post subject: ST500DM002 BUSY

Posted: June 11th, 2014, 9:33

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/

longlife wrote:

please explain in what is written in this thread.

According to the terminal log, everything is OK with the drive.
With the info available for now there's nothing else to explain.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.

Top

fali2004

Post subject: Re: ST500DM002 BUSY

Posted: July 8th, 2014, 7:17

Joined: July 8th, 2014, 7:06
Posts: 5
Location: España

could tell me what the pin as do the short read-channel in the pcb?

thanks in advance

Top

saltwater

Post subject: Re: ST500DM002 BUSY

Posted: July 8th, 2014, 7:44

Joined: November 3rd, 2013, 13:04
Posts: 330
Location: Hungary

fali2004 wrote:

could tell me what the pin as do the short read-channel in the pcb?

thanks in advance

Check this thread:
http://malthus.zapto.org/viewtopic.php?f=24&t=123&p=1632&hilit=read+channel#p1632

Top

fali2004

Post subject: Re: ST500DM002 BUSY

Posted: August 5th, 2014, 4:40

Joined: July 8th, 2014, 7:06
Posts: 5
Location: España

Yesterday I was trying to unlock the terminal hard disk

Short read channel on PCB but did not have access

In the terminal reports me the following:

FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000

LED: 000000EE FAddr: 0010289C

What can be happening? Please I need help.

Thanks in advance

Top

mikail13

Post subject: Re: ST500DM002 BUSY

Posted: November 22nd, 2014, 13:10

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul

fali2004 wrote:

Same error, same symptom
Is there a any help?

Top

Page 1 of 1

[ 15 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum