MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 34 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
fzabkar
 Post subject: Re: IO errors after head swap
PostPosted: February 11th, 2015, 14:08 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17095
Location: Australia
kaxi wrote:
Is model number is the only thing you checked for HSA compatibility? If this is the case, you sould research a bit more for HSA compatibility criteria. It's all there.

Headstack matching for Western Digital:
http://www.hddoracle.com/viewtopic.php?f=86&t=1036

_________________
A backup a day keeps DR away.
Top
 Profile  
 
myiannakou
 Post subject: Re: IO errors after head swap
PostPosted: February 11th, 2015, 15:47 
Offline

Joined: January 7th, 2015, 5:40
Posts: 48
Location: London, England
That's right - I'm NOT reading via SATA

_________________
http://www.computerworksuk.com
Top
 Profile  
 
kaxi
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 5:44 
Offline

Joined: March 14th, 2014, 9:39
Posts: 61
Location: Macedonia, GREECE
If you don't have the DDI USB add-on, converting to SATA would give you the only chance of recovery if media damage is involved. After imaging whatever is posible, then you can deal with the encription issue as a next step.
Top
 Profile  
 
myiannakou
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 5:58 
Offline

Joined: January 7th, 2015, 5:40
Posts: 48
Location: London, England
Yes I was afraid that was going to be the case. I've email Ace Labs for a quote

_________________
http://www.computerworksuk.com
Top
 Profile  
 
pcimage
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 6:56 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK
myiannakou wrote:
Yes I was afraid that was going to be the case. I've email Ace Labs for a quote


It's approx. €5,000

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
myiannakou
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 9:41 
Offline

Joined: January 7th, 2015, 5:40
Posts: 48
Location: London, England
Seems pretty reasonable when you considered what their equipment is capable of and the support they offer.

_________________
http://www.computerworksuk.com
Top
 Profile  
 
pcimage
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 11:05 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK
Yes, it is :-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
lcoughey
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 13:23 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2585
Location: Ontario, Canada
myiannakou wrote:
Seems pretty reasonable when you considered what their equipment is capable of and the support they offer.

It is certainly cheaper than having an own in-house engineering team making your own equipment.

_________________
Luke
Recovery Force Donor Inventory: 5,000+ Fully Cataloged HDDs & Growing
Top
 Profile  
 
fzabkar
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 14:56 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17095
Location: Australia
lcoughey wrote:
It is certainly cheaper than having an own in-house engineering team making your own equipment.

You could apply that same argument to justify the price of a one million dollar car or television set.

I wonder what the price of tools would be if every potential developer had access to the same stolen/leaked information. There are plenty of intelligent people in the open source community who would very quickly change the shape of the data recovery business with free or affordable tools.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Alexii
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 15:00 
Offline

Joined: October 28th, 2009, 14:35
Posts: 775
Location: Toronto
If you are reading the drive through the USB - stop. Results in most cases are bad. There is a procedure you can find on the forum that allows for SATA access ( removing 4 capacitors ) or in some cases you can use compatible SATA board ( there is a list on the forum as well ) But that in turn bypasses the encryption controller (depending on the drive Initio, jmicron, PLX ). I use data extractor for this next step , however you might be able to bypass that using the 3.5 sata to usb bridges from My Books ? Have any techs attempted that? Good luck.

PS my rule of thumb is if drive IDs with donor heads - i dont question compatibility =)
Top
 Profile  
 
hhddrec
 Post subject: Re: IO errors after head swap
PostPosted: February 12th, 2015, 18:19 
Offline
User avatar

Joined: August 13th, 2008, 13:10
Posts: 811
Location: World
The most probably problem is media damage on 1 platter face. very probably too 1 badlly head.

the best is to take a look to all platter heads (but tools needed to extract heads, platters,..)
Top
 Profile  
 
Alexii
 Post subject: Re: IO errors after head swap
PostPosted: February 13th, 2015, 11:48 
Offline

Joined: October 28th, 2009, 14:35
Posts: 775
Location: Toronto
i had situations when a 2.5 usb3 wd would not even ID normally under USB conditions , but working with the same drive through SATA yielded close to 100% clean images.
Top
 Profile  
 
myiannakou
 Post subject: Re: IO errors after head swap
PostPosted: February 13th, 2015, 13:57 
Offline

Joined: January 7th, 2015, 5:40
Posts: 48
Location: London, England
pcimage. What do you mean OP? I've seen this scattered around the forum. What does it stand for?

_________________
http://www.computerworksuk.com
Top
 Profile  
 
myiannakou
 Post subject: Re: IO errors after head swap
PostPosted: February 13th, 2015, 14:41 
Offline

Joined: January 7th, 2015, 5:40
Posts: 48
Location: London, England
Ah OK. Thank you

_________________
http://www.computerworksuk.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 34 posts ]  Go to page Previous  1, 2

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 59 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group