There are several posts and information for this typical symptoms ,but still I would like to know more --


Seagate Barracuda FW KC45 , Disk stays busy & does not come to terminal.
After isolating HDA it gives following terminal -

Boot 0x10M
Spin Up
FAIL Servo Op=0100 Resp=0003
ResponseFrame FFFF 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2EA0 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2EA0 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000



I have tried to short read channel but not getting success.

Now I want to know whether this could be because of any other reason like --

1) PCB non native
2) PCB issue,

can someone pls. help

What kind of sounds are coming from the drive.

Does it continue to spin or spin down?

_________________
Web: https://www.day1data.de

hi day1data
Thanks.
it spins normally no abnormal sounds nor it spins down as well.

Check Serial Number from rom content (External Programmer) and compare S/N in lable ( I had faced this many times)

Hi gps31
Thanks. I was about to do the same ,but before that customer took disk back due to long delay from my side. Tragic end to this case

Dear Sir

HDD Sping Possible

Other Way noot Sping Not Possibles

_________________
Raminfotech Data Recovery
Chennai's No.1 Data Recovery Center

http://www.raminfotechdatarecovery.com
skp:raminfotech.vijayan

FAIL Servo Op=0100 Resp=0003
this case

1 check pcb
2. hdd sping ? rom or pcb problem
3. most this error hdd head problem 10% only rom problem




any ? call 9841983643 raminfotechdatarecovery.com

_________________
Raminfotech Data Recovery
Chennai's No.1 Data Recovery Center

http://www.raminfotechdatarecovery.com
skp:raminfotech.vijayan

check your work with ROM and PCB
find 1 PCB code used to work and move ROM to