MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 23 posts ]  Go to page 1, 2  Next
  Previous topic | Next topic 
Author Message
jaja0714
 Post subject: Seagate Barracuda LP 2TB
PostPosted: February 28th, 2016, 14:02 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
Ok, this drive died recently and I would like to move as much as possible before tossing it.

It spins up fine and hums nicely but Windows 10 just doesn't like it.

When I go into DOS (CMD as admin), I can see all my files and directory structures but I cannot copy or move anything to another disk. As you can tell from my xcopy attempt below 99.99% of my data was NOT moved.

Any ideas?

Code:
C:\WINDOWS\system32>n:

N:\>dir
Volume in drive N is 6.  Seagate1
Volume Serial Number is A404-D26B

Directory of N:\

12/23/2015  11:08 PM    <DIR>          Google Drive
06/03/2014  09:01 AM    <DIR>          Movies
06/03/2014  09:11 AM    <DIR>          Music Videos
10/04/2011  10:30 AM    <DIR>          TV Shows
02/14/2012  02:48 PM    <DIR>          xbmciso
               0 File(s)              0 bytes
               5 Dir(s)  215,306,993,664 bytes free

N:\>xcopy n: m: /s/e/r/c/h/k/o/x/y
File creation error - The request could not be performed because of an I/O device error.

Unable to create directory - M:\$RECYCLE.BIN
The device is not ready.
File creation error - The device is not ready.

Unable to create directory - M:\Movies
File creation error - The request could not be performed because of an I/O device error.

Unable to create directory - M:\Music Videos
N:System Volume Information\IndexerVolumeGuid
Access denied
N:System Volume Information\tracking.log
N:System Volume Information\Chkdsk\Chkdsk20130418153154.log
N:System Volume Information\Chkdsk\Chkdsk20130427133105.log
N:System Volume Information\Chkdsk\Chkdsk20130427133259.log
N:System Volume Information\Chkdsk\Chkdsk20150726011113.log
N:System Volume Information\EfaSIDat\SYMEFA.DB
Access denied
N:xbmciso\WTP1NNE1\type.Movies
N:xbmciso\WTP1NNE1\type.Music Videos
N:xbmciso\WTP1NNE1\type.TV Shows
N:xbmciso\WTP1NNE1\WTP1NNE1.iso
File creation error - Data error (cyclic redundancy check).

N:xbmciso\WTP1NNE1\xbmciso.log
File creation error - Data error (cyclic redundancy check).

8 File(s) copied

N:\>
Top
 Profile  
 
jermy
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 28th, 2016, 14:36 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
I don't get it
your problem is with the source drive (n) or with the destination drive (m) ?
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 28th, 2016, 14:47 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
The source drive (n). The destination drive (m) is brand new.
Top
 Profile  
 
jermy
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 28th, 2016, 15:10 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
But IIUC the error "Unable to create directory" is referring to the destination drive (m)
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 28th, 2016, 16:19 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
It is strange. Now, I can't do a directory of all the subfolders in (n). I had another drive which "went bad" too and I find it too coincidental that I never had a problem with my 8 drives for 3-4 years until, all of a sudden two drives disappeared when I upgraded to Windows 10.
Top
 Profile  
 
labtech
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 28th, 2016, 17:35 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
Work with the drive outside the Win environment. Check SMART, check mechanics via software with something like MHDD, and so on.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 28th, 2016, 18:25 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
Do you have more details on how I can work on these drives outside of the windows environment?
Top
 Profile  
 
fzabkar
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 28th, 2016, 18:46 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16955
Location: Australia
jaja0714 wrote:
Do you have more details on how I can work on these drives outside of the windows environment?

Try mounting the drives from a Ubuntu Live CD.

SMART tools include CrystalDiskInfo (Windows) or smartmontools (Linux). Look for reallocated, pending, or uncorrectable sectors.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 29th, 2016, 17:01 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
I was able to see the entire directory structure of my "bad" Seagate 2TB HDD from UBUNTU! The "partitions" looks a bit weird though when compared to other HDDs on my system. It showed 4 partitions, 2 of which were both 2TB in size.

Only one of those 2TB partitions was accessible via ubuntu and, from there, I was able to "see" a listing of all files and directories but I was unable to move those files to another disk due to some sort of splice error. When I try to copy similarly sized files from 2 other HDDs, it works fine. So, something is wrong with this particular disks partition table or something?

I'm not sure what to do next actually...
Top
 Profile  
 
fzabkar
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 29th, 2016, 17:14 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16955
Location: Australia
Could we see the partitions in a disc editor, eg DMDE (freeware)?

http://dmde.com/

_________________
A backup a day keeps DR away.
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: February 29th, 2016, 21:39 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
Hmmmm... do you mean, from Windows? I'm not sure that will work because Windows can't see this drive as well as ubuntu. When I google DMDE, I only see a windows download.
Top
 Profile  
 
fzabkar
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 1st, 2016, 14:02 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16955
Location: Australia
DMDE is a disc editor. A drive does not need to be mounted in order for DMDE to work with it. In fact it is often better that the OS does not mount it.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 1st, 2016, 14:53 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
That makes sense but I'm not sure how to go about it then.

If I download the Windows version, how do I stop windows from mounting the drive before I run DMDE?

Should I run DMDE under ubuntu? If so, do I download that "linux" version or something else?
Top
 Profile  
 
fzabkar
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 2nd, 2016, 2:10 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16955
Location: Australia
Just run DMDE under Windows and show us the Partitions window.

If you wish to prevent Windows from mounting the volumes, then click the MBR On/Off button. This will invalidate the 55 AA signature at the end of sector 0.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 2nd, 2016, 10:09 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
see attached


Attachments:
dmde partitions.jpg
dmde partitions.jpg [ 86.75 KiB | Viewed 17045 times ]
Top
 Profile  
 
fzabkar
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 2nd, 2016, 10:23 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16955
Location: Australia
That's LBA 9. We need to see LBA 0.

If you select Mode-> Hex/Text, you will probably see that LBA 9 is filled with "BAD ".

_________________
A backup a day keeps DR away.
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 2nd, 2016, 13:56 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
they all are actually
Top
 Profile  
 
jermy
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 2nd, 2016, 14:24 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
jaja0714 wrote:
they all are actually

actually what ? the same ? (do you use a translator ?)
Top
 Profile  
 
jaja0714
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 2nd, 2016, 22:01 
Offline

Joined: February 28th, 2016, 13:54
Posts: 11
Location: New York City
fzabkar, LBA:0 is EXACTLY the same as LBA:9 ... also in Hex mode, everysingle line (thousands and thousands of them all say "BAD BAD BAD BAD" at the end.
Top
 Profile  
 
fzabkar
 Post subject: Re: Seagate Barracuda LP 2TB
PostPosted: March 2nd, 2016, 22:26 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16955
Location: Australia
Can you connect the drive to a SATA port rather than a USB-SATA bridge?

Can you see the SMART data?

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 23 posts ]  Go to page 1, 2  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group