MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Previous topic | Next topic 
Author Message
H13
 Post subject: Help me in Raid Case ...
PostPosted: April 14th, 2016, 15:52 
Offline

Joined: December 16th, 2015, 12:37
Posts: 99
Location: GCC
Hi All

First ... i have Raid 6 case .. I DID RAID configuration able to see the partition and 6 tb off data .. but there is some folder empty .. the client said there is files in this folders .... is it possible to get 6 tb off data all is working fine -- but there is folders is empty .. ?
why it can be happen ? where is the problem here ?!


second : can someone direct me how to lean more in raid recovery ? if there is good pages or info at internet please provide it for me .. if not here please PM me .. even it's not freei will pay for it >>

i am waiting you all

thanks
Top
 Profile  
 
lcoughey
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 14th, 2016, 16:11 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2574
Location: Ontario, Canada
Got more details about the RAID than that it is RAID 6? Is it a software or hardware RAID? What kind of system was it in? What is the file system? What happened that makes recovery necessary?

_________________
Luke
Recovery Force Data Recovery
Top
 Profile  
 
H13
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 14th, 2016, 16:32 
Offline

Joined: December 16th, 2015, 12:37
Posts: 99
Location: GCC
Hi, lcoughey,

this is Buffalo nas storage ... 8 HDD .. 2 drives is damage so i use the 6 and reconfigure it as raid 6 ... i found the partition XFS -- 6 tb off data i saved and it's working fine but i found some folder empty .. the client said that .. there is more files ... if i do wrong raid configer how can i get 6 tb off data and the data is working !
Top
 Profile  
 
Dmitri
 Post subject: Re: Help me in Raid recovery
PostPosted: April 14th, 2016, 18:49 
Offline

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/
H13 wrote:
i have Raid 6 case .. I DID RAID configuration able to see the partition and 6 tb off data .. but...

if not here please PM me ..

If necessary, we'll be happy to help with this recovery remotely.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.
Top
 Profile  
 
DR-Kiev
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 15th, 2016, 5:26 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1091
Location: Angel Data Recovery
What sw tool has been used to access data on XFS ? Are those recovered files in good condition? It seems something additionally wrong with file system or with SW you are using. I can try to help remotely.

_________________
Angel Data Recovery
Top
 Profile  
 
terryhoho
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 15th, 2016, 6:52 
Offline

Joined: September 1st, 2014, 17:08
Posts: 33
Location: Singapore
Interesting issue which I'm facing as well.
the largest file size i got is a 1GB working well zip file.
So i suppose my parameters for recovering the raid is correct.
Top
 Profile  
 
jermy
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 15th, 2016, 7:01 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
terryhoho wrote:
Interesting issue which I'm facing as well.
the largest file size i got is a 1GB working well zip file.
So i suppose my parameters for recovering the raid is correct.

Congrats
Top
 Profile  
 
H13
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 15th, 2016, 7:25 
Offline

Joined: December 16th, 2015, 12:37
Posts: 99
Location: GCC
DR-Kiev wrote:
What sw tool has been used to access data on XFS ? Are those recovered files in good condition? It seems something additionally wrong with file system or with SW you are using. I can try to help remotely.


i use ufsexplorer and the files working fine ... even big files like pst .. working

i believe there is something wrong ...

this is : TeraStation III TS-8VHL
8X3 tb HDDs .. 2 is damaged .. i us usf to access data .. raid6 ..

thanks dr for your help

thanks demitry for your help

terryhoho ? you face same problem ?

jermy .. thanks too

waiting for your helps eng ..
Top
 Profile  
 
terryhoho
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 15th, 2016, 7:42 
Offline

Joined: September 1st, 2014, 17:08
Posts: 33
Location: Singapore
H13 wrote:
DR-Kiev wrote:
What sw tool has been used to access data on XFS ? Are those recovered files in good condition? It seems something additionally wrong with file system or with SW you are using. I can try to help remotely.


i use ufsexplorer and the files working fine ... even big files like pst .. working

i believe there is something wrong ...

this is : TeraStation III TS-8VHL
8X3 tb HDDs .. 2 is damaged .. i us usf to access data .. raid6 ..

thanks dr for your help

thanks demitry for your help

terryhoho ? you face same problem ?

jermy .. thanks too

waiting for your helps eng ..


yeah same problem. managed to get a lot files out in perfect shape.
what have the 2 experts tried to help you on?
Top
 Profile  
 
jermy
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 15th, 2016, 10:34 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
H13 wrote:
jermy .. thanks too

Its for "terryhoho" he said
terryhoho wrote:
the largest file size i got is a 1GB working well zip file.
So i suppose my parameters for recovering the raid is correct.

IMHO he says that he managed to recover everything successfully.
Top
 Profile  
 
terryhoho
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 17th, 2016, 23:15 
Offline

Joined: September 1st, 2014, 17:08
Posts: 33
Location: Singapore
jermy wrote:
H13 wrote:
jermy .. thanks too

Its for "terryhoho" he said
terryhoho wrote:
the largest file size i got is a 1GB working well zip file.
So i suppose my parameters for recovering the raid is correct.

IMHO he says that he managed to recover everything successfully.


No, I recovered most of the things, including 1GB working zip file. So i assume the parameter is correcet.
but some files were not recovered, which includes corrupted files small as less than 1MB excel file, pictures, and missing file in folders
Top
 Profile  
 
S.Haran
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 18th, 2016, 9:49 
Offline

Joined: February 16th, 2016, 21:07
Posts: 43
Location: Boston, USA
My suspension is you have the RAID6 assembled in UFSexplorer using a drive that dropped out of the RAID some time ago. Since the TeraStation uses Linux Software RAID aka mdadm you can look at the meta-data from each member drive using Linux. For example the below is from a remote TeraStation recovery I performed in the past. Note the Events count and Update Times should be in sync for all RAID member drives. In any case you may want to assemble the RAID using Linux mdadm to check if Linux can see your missing files. If you need additional help I am happy to provide remote assistance.

Code:
% mdadm -E /dev/sdb6
/dev/sdb6:
          Magic : a92b4efc
        Version : 0.90.00
           UUID : 78a5fba6:5739f38b:d32f4eec:161692a6
  Creation Time : Wed Nov 30 09:18:49 2011
     Raid Level : raid5
  Used Dev Size : 961749888 (917.20 GiB 984.83 GB)
     Array Size : 2885249664 (2751.59 GiB 2954.50 GB)
   Raid Devices : 4
  Total Devices : 2
Preferred Minor : 2

    Update Time : Mon Dec 15 10:31:42 2014
          State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 2
  Spare Devices : 0
       Checksum : 3f4e411d - correct
         Events : 2238388

         Layout : left-symmetric
     Chunk Size : 64K

      Number   Major   Minor   RaidDevice State
this     1       8       22        1      active sync   /dev/sdb6

   0     0       8        6        0      active sync   /dev/sda6
   1     1       8       22        1      active sync   /dev/sdb6
   2     2       0        0        2      faulty removed
   3     3       0        0        3      faulty removed

_________________
On-Line Data Recovery Consultant. RAID / NAS / Linux Specialist.
Serving clients worldwide since 2011
FreeDataRecovery.us
Top
 Profile  
 
Dima_RnD
 Post subject: Re: Help me in Raid Case ...
PostPosted: April 20th, 2016, 7:20 
Offline

Joined: April 20th, 2016, 7:08
Posts: 15
Location: Rostov-on-Don, Russia
Maybe one of RAID mamber is invalid and you have to disable it and recover data from XOR or RS blocks.
Also some XFS prtitions have 1024 sector size, try to look into empty folders with these parameters.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group