View topic - Seagate ST3250312AS Barracuda 7200.12

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Seagate ST3250312AS Barracuda 7200.12

Page 1 of 1

[ 2 posts ]

Previous topic | Next topic

Author

Message

lasek

Post subject: Seagate ST3250312AS Barracuda 7200.12

Posted: August 25th, 2016, 10:00

Joined: February 26th, 2016, 5:02
Posts: 81
Location: Poland

Hello,

I have disk like in the subject. Disk spin normally but isn't recognize in bios and windows.

From terminal I have:

Code:

Rst 0x08M
Servo Processor Is Reset.
RW: Disc Ctlr Initialization Completed.

ExecuteSpinRequest
                  vqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvq
 SIM Error 1002vqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvqvq
 SIM Error 1002vYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvY
 SIM Error 1002vYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvYvY
 SIM Error 1002
No HOST FIS-ReadyStatusFlags 2002A1A5

ASCII Diag mode

F3 T>/2

Any idea what I can do with this disk to repair it? Data is not important to me.

Top

pc2005

Post subject: Re: Seagate ST3250312AS Barracuda 7200.12

Posted: August 25th, 2016, 13:01

Joined: August 15th, 2016, 6:05
Posts: 15
Location: Czech Republic

RMA it. I wouldn't trust once failed drive :-/.

I'm not a pro, but from "F3 Serial Port Diagnostics" (don't know if it is same class of error codes):

Code:

DiagError - Diagnostic Error Codes
0x1002: Memory Miscompare Error

Anyway SIM error means errors with "files", which are used by firmware.

Before any actions, save all data from "/TF", "/TVfff" and "/TrXXX,3" (XXX = around 0-0x400, there are tutorials).

_________________
Support opensource code reverse engineering tool radare2.

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum