MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 3
  [ 41 posts ]  Go to page 1, 2, 3  Next
  Previous topic | Next topic 
Author Message
M041633n
 Post subject: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 16th, 2024, 11:46 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
Hello everyone! Can you guys guess what's going on with this drive! Cause it's very important to me! It's spinning but it's not detecting on windows nor it doesn't made any detection noise just spins that's all! Any help would be highly appreciated Image
Top
 Profile  
 
fzabkar
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 16th, 2024, 12:42 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
That's a Samsung model. Show us the terminal log.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 16th, 2024, 16:49 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
BTW what's a terminal log??
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 16th, 2024, 16:50 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
How do I open a terminal log!
Top
 Profile  
 
fzabkar
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 16th, 2024, 16:54 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
How to connect a terminal adaptor on a Samsung drive ?

https://www.hddoracle.com/viewtopic.php?f=116&t=189

_________________
A backup a day keeps DR away.
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 17th, 2024, 2:44 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
Connected! And now what to do??

Image
Top
 Profile  
 
fzabkar
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 17th, 2024, 2:52 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
Power it up and record the terminal log.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 17th, 2024, 4:22 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
How?? Do I do that??
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 17th, 2024, 9:11 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
The PuTTY terminal is blank. If I type something it's garbage no text only ascii's any help
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 18th, 2024, 12:18 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
Could anybody help me on this please!
Top
 Profile  
 
fzabkar
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 18th, 2024, 14:32 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
For testing purposes, connect Tx to Rx on your adaptor and then type something. You should see a local echo.

Measure the voltages at the HDD's Tx and Rx pins. Set the I/O voltage of your adaptor to the same I/O voltage as the HDD. (eg 1.8V to 1.8V, 2.5V to 2.5V)

Then connect Rx to Tx, and Tx to Rx, between your adaptor and HDD. Select the appropriate baud rate, parity, start/stop bits, data bits in PuTTY.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 19th, 2024, 2:24 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
Can't this be a step by step procedure sir??
Top
 Profile  
 
fzabkar
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 19th, 2024, 2:33 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
M041633n wrote:
Can't this be a step by step procedure sir??

Step #1: For testing purposes, connect Tx to Rx on your adaptor and then type something. You should see a local echo. This is called a loopback test.

Step #2: Measure the voltages at the HDD's Tx and Rx pins. Set the I/O voltage of your adaptor to the same I/O voltage as the HDD. (eg 1.8V to 1.8V, 2.5V to 2.5V)

Step #3: Then connect Rx to Tx, and Tx to Rx, between your adaptor and HDD. Select the appropriate baud rate, parity, start/stop bits, data bits in PuTTY.

Step #4: Power on the drive and show us the terminal output.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 19th, 2024, 3:05 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
Image
numbers remove duplicates

It's the same thing
Top
 Profile  
 
SWM
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 19th, 2024, 4:24 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 327
Location: Eastern Europe
3,5 inch Samsung SATA hdd:
[''''''''PWR'''''''''] ['''SATA'''] [ : : : | ] RX / TX

2,5 inch Samsung SATA hdd:
[''''''''PWR'''''''''] ['''SATA'''] [ TX RX X X ]

HDD Samsung Marvell chip:
Bits per second - 57600
Data bits - 8
Parity - None
Stop Bits - 1
Flow Control - None/Hardware

HDD Samsung Samsung chip:
Bits per second - 38400
Data bits - 8
Parity - None
Stop Bits - 1
Flow Control - None/Hardware

If the HDD on a separate power supply is connect HDD GND to the adapter GND.
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 22nd, 2024, 13:12 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
Code:
..OK
..OK
eng>01
    E:0001
E:0001
eng>eng>
        E:0001
E:0001
eng>
    E:0001
E:0001
eng>
    e'▒▒▒j
          E:0001
eng>
    eng>
        E:0001
E:0001
eng>
    E:0001
E:0001
eng>E:0001
eng>'&LLLCQ
▒▒01
E:0001
eng>
    eng>
        eng>
E:0001      E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
eng>E:0001
e▒>E:0▒>E0001
eng>E:0001
eng>E:0001
eng>E?▒▒▒j
          eng*:0001▒&▒▒j
                        ▒
en




This is what i'm getting
Top
 Profile  
 
fzabkar
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 22nd, 2024, 13:48 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
After power-on, you should see something like this:

Code:
ActiveFW : 00
FWVer : 0001
SATA PLL cal done
DDR size detected = 8MB

*PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI Found
*PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI FoundU

_________________
A backup a day keeps DR away.
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 23rd, 2024, 0:29 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
But that's what I'm getting and when I try it again it doesn't show anything just a green cursor on PuTTY and nothing. What might be the issue??
Top
 Profile  
 
M041633n
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 23rd, 2024, 0:42 
Offline

Joined: January 16th, 2024, 6:53
Posts: 156
Location: Chennai
Code:
ActiveFW : 00
             FWVer : 0001
                         SATA PLL cal done
                                          DDR size detected = 16MB

                                                                   DDR size detected = 16MB

           *PAUNI_L2958*PA VID=0011 PN=000D Rev=0000- PA_LSI2958 Found
                                                                      *PAUNI_L2958*PA VID=0011 PN=000D Rev=0000- PA_LSI2958 FoundU
S_0SO_1
SPU@32'C,5138mV
IS=2
CLA ..36/87
HO..OK
HO RPM=628 OK
AC 1690
ST..OK
mS1 00000003
GT:434
SC(L):4145/76
BE.N:35
LD..OK
SK C:  3162 H:0

[DF_TMOUT0:0000:0000]
SR:0

[DF_TMOUT0:0000:0000]
SR:0
AP:2 C:  7285->  7285 H:0->0 AP Cnt: 0
SK C: 53534 H:0
SR:1
AP:2 C: 53534->  7285 H:0->0 AP Cnt: 0
SK C: 62710 H:0

[DF_TMOUT0:0000:0000]

S_0SR:0
AP:2 C:  7285->  7285 H:0->0 AP Cnt: 0
SK C: 59157 H:0
SR:1
AP:2 C: 59157->  7285 H:0->0 AP Cnt: 0
SK C: 64858 H:0

[DF_TMOUT0:0000:0000]


now i'm getting this!
What shoud i've to do now!
i cannot type on that page!
Top
 Profile  
 
Axis937
 Post subject: Re: ST1000LM024 is spinning but not reading nor detecting!
PostPosted: June 23rd, 2024, 1:49 
Offline

Joined: June 12th, 2024, 1:02
Posts: 21
Location: 52s@gWvtQkEBwsz
May i ask what hardware or software you are using to read the values?

Munnar Anneh must be very angry.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 3
  [ 41 posts ]  Go to page 1, 2, 3  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 180 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group