Dear kagzizaid80 sir,
These commands only do harm. Especially to data recovery.
As well as recalculating the translator without a backup of system files.
And it is impossible to restore erased P-list records. They are unique for each disk.
For your level of knowledge - listen to the pepe:
"without knowhow you better outsource it..."

try one thing:
write this into beginning of 1B:


don't regen translator, just try lba access after power cycle.

Thank You Pepe Sir,

I will do and update you sir.

first you wrote you can't access sector, to me this means no LBA access. You didn't write wether capacity is OK. Now you write partial access, it is confusing.
If you have partial access, what's the last lba you can read?

Dear Pepe Sir,
Please see attach pic, When i got hdd it has partial access problem. All sector bad reported by R-Studio. When i apply translator regeneraton command i got Process defect list error. when googling i found that sys file 1B has problem accroding to various forum.

Partial access means drive is able to read user area up to a specific LBA. You say all sectors are inaccessible, ie this is not a partial access problem. Without tools you will likely cause more harm than good, plugging defective disks under windows is a very bad idea anyway.