UPDATE: After watching tutorials and reading guides translated from Russian, I understand that “test mode” can be activated by pricking certain parts of the USB memory chip with a sharp object (not the PHISON chip, The metal resistors of the Memory Chip). Using this technique, You have to plugged your USB, and at the same time poke it with the pointed object. With that, the USB is connected to the PC and enters “test mode.” In theory, when I restore the USB with the latest program you sent me, it, as far as i know, this happens because of the write protection, which is not removed when the USB was disconnected when i was Restoring it or a USB protection that is removed on test mode. If I find out anything new, I will let you know. If not, then I will hammer the USB. Cheers!.