MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
quasimodo
 Post subject: assistance required in deciphering Terminal log
PostPosted: September 1st, 2007, 21:07 
Offline

Joined: October 23rd, 2006, 8:56
Posts: 1336
Hello Guys,
I am having a problem with a Baracuda 7200.7. I am having super manny bad sectors and can't get access to the data. I really don't have any experience with Seagate drives. Any help is appreciated.

Here is the return from the Terminal (I can get T prompt but can't switch to F).


Code:
              Spin Ready
8.04  12-19-05 10:47  4096k x 16 buffer
(P)(H)SATA Reset
Interface task reset
4096k x 16 buffer detected
PUMA2 - 1_Disk    0.03  12-19-05 10:45
Head Mask FFFF - Switch to full int.
              Spin Ready

8.04  12-19-05 10:47  4096k x 16 buffer
(P)(H)SATA Reset
AT Er 00 Nwt Er 37 RdWr 00036.01.0391
ATA St 80 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot:  0000394b  ff  0000394b.e.c89 0005  0000 0000 0000
DiskAccess ReadSector EC=43 at 000036.01.0391
SCAN Error

AT Er 00 Nwt Er 37 RdWr 0eafc.01.01cf
ATA St 80 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot:  0000394b  ff  0000394b.e.c89 0005  0000 0000 0000
DiskAccess ReadSector EC=43 at 00eafc.01.01cf
SCAN Error
               


I am having some dificulties reading the log, I downloaded the seagate diagnostic command document but am still a bit clueless. Any additional information on Terminal commands would be great as wel.
Quote:
Head Mask FFFF - Switch to full int

I asume this means Heads are OK, is this correct?
Thanks
Top
 Profile  
 
TerraNova
 Post subject: Re: assistance required in deciphering Terminal log
PostPosted: September 1st, 2007, 23:03 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
I think it is HDA problem
Top
 Profile  
 
beto
 Post subject: Re: assistance required in deciphering Terminal log
PostPosted: September 1st, 2007, 23:12 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
its BSY, or u get DRDY DSC?

If u get DRDY DSC; u can try to check heads


Best Regards
Top
 Profile  
 
quasimodo
 Post subject: Re: assistance required in deciphering Terminal log
PostPosted: September 2nd, 2007, 12:12 
Offline

Joined: October 23rd, 2006, 8:56
Posts: 1336
Thanks for the quick replies.

In PC 3000 I don't get any registers, only times out with HD ID readding timeout when using ATA Mode. In Terminal mode I get a output mentioned in the above post.
Quote:
DiskAccess ReadSector EC=43 at 000036.01.0391
SCAN Error

I think I should be able to check heads from T:> (but I don't know the command).
Top
 Profile  
 
tonyht
 Post subject: Re: assistance required in deciphering Terminal log
PostPosted: September 2nd, 2007, 21:51 
Offline

Joined: July 27th, 2005, 3:35
Posts: 92
you can try press CTRL+Z

it should be able to go to T command
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 50 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group