MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 19 posts ] 
  Previous topic | Next topic 
Author Message
ergo911
 Post subject: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 7th, 2008, 9:29 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
Hey

I filled my hdd with zeros, it hanged... i restarted my pc
and my hdd is now dead :(
No known utility won't work... it shows my drive in bios and utilites,
mark & s/n are all ok, but i can't make any patritions and if i scan for errors
then all sectors are BAD :(

IS my drive realy dead or something can make it useble again?

Thax
Top
 Profile  
 
rchadwick
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 7th, 2008, 11:15 
Offline

Joined: December 23rd, 2006, 16:08
Posts: 935
Location: NJ
A real silly question, forgive me if it's too obvious. Was this your boot drive?

If not, can you try again filling with zeros?
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 7th, 2008, 11:47 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
it can't fill with zeros anymore... only what this drive does
is low level format with samsung utility... and in the end it gives a
error... if i run seatools or any utility for check errors, then all sectors are BAD...

Like the heads are damaged... or i don't no what anymore :(
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 7th, 2008, 12:16 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
Drive Fitness Test say's:
Device is Password prodected and can not tested.

I have test almoust every utility on UBCD 4.11.
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 7th, 2008, 15:58 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Hi What Utility did You Use .

initially

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 10th, 2008, 3:18 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
Hi

I used Active KillDisk Free Edition v4.1 on the ubcd.
It hanged and after that i can't do anything with my disk.
No known utility won't work :(
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 10th, 2008, 3:43 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Try Active Killdisk again Cos it Might Be Password Protecting the HDD Before Doing Zerofilling ,

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
sadiq005
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 10th, 2008, 3:47 
Offline

Joined: January 29th, 2008, 7:43
Posts: 22
Hi try HDD password removal tool in dos to remove password.

Thanks.
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 10th, 2008, 4:27 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Sadiq ,
What If He Does Not Remember it ?

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 10th, 2008, 4:58 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
i have'nt put any passwords... and atapwd can't put or erase any passwords and gives a error :(
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 10th, 2008, 4:58 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
Amarbir wrote:
Try Active Killdisk again Cos it Might Be Password Protecting the HDD Before Doing Zerofilling ,


active killdisk won't see my drive.
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 10th, 2008, 9:18 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
i just used samsung sutil's and it say's DRQ timeout, when i wanted to to Entire_erase???
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 10th, 2008, 11:51 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
mhdd says it is password prodected, but can not remove :(
but i found a programm called a-ff repair station, it say's it is
prodected with password and it can be removed with this programm, but it costs :(
Top
 Profile  
 
sadiq005
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 11th, 2008, 0:52 
Offline

Joined: January 29th, 2008, 7:43
Posts: 22
Hi try this program in dos ATAPWD 1.2
Hard Disk Password Utility you can remove the password.i hope it gets resolved.
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 11th, 2008, 3:27 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
sadiq005 wrote:
Hi try this program in dos ATAPWD 1.2
Hard Disk Password Utility you can remove the password.i hope it gets resolved.


HI

Atapwd says Command rejected by drive????
Has someone used a-ff repair station... does it work???
Top
 Profile  
 
sadiq005
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 11th, 2008, 7:33 
Offline

Joined: January 29th, 2008, 7:43
Posts: 22
Hi, i don't know about Aff-repair i have tried ATApwd it got resolved.

Thanks.
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 12th, 2008, 6:21 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
Anybody??? pleazzz.
Top
 Profile  
 
Dmitry Postrigan
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 13th, 2008, 10:06 
Offline

Joined: September 27th, 2005, 8:21
Posts: 765
A cheaper alternative to A-FF Repair Station would be HDD Unlock Wizard: http://hddunlock.com

_________________
Dmitry
Top
 Profile  
 
ergo911
 Post subject: Re: SAMSUNG SP1654N after Zero-Fill HDD won't work
PostPosted: March 14th, 2008, 5:02 
Offline

Joined: March 7th, 2008, 9:23
Posts: 11
maysoft wrote:
A cheaper alternative to A-FF Repair Station would be HDD Unlock Wizard: http://hddunlock.com


Has someone used it?
What means DRQ timeout? is'nt it a real hardware error?

Thax
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 19 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 104 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group