MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Previous topic | Next topic 
Author Message
TerraNova
 Post subject: Seagate 1T bytes terminal connection
PostPosted: May 15th, 2008, 2:33 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
Hi guys

Does anyone know the terminal connection for Seagate ST31000340AS? I tried using the 4 pins (next to SATA data cable) but the terminal shows nothing.

Thanks
Top
 Profile  
 
pcimage
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: May 15th, 2008, 3:29 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
I would also like to know how (if possible) to connect to a 500Gb 7200.11.

TIA

Sean

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
prodata
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: May 15th, 2008, 7:20 
Offline
User avatar

Joined: October 6th, 2005, 3:00
Posts: 657
me too. seagate change terminal access to 72.11
can not connect using standard sata jumper port

_________________
Спасибо
СУТИОНО / АПИНГ
Top
 Profile  
 
TerraNova
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: May 16th, 2008, 22:04 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
anyone have succeeded in connecting to terminal?
Top
 Profile  
 
darkforce1
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: May 16th, 2008, 23:38 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
I am also joining you.

DF :)

_________________
DF :)
www.datatracksystem.net
Top
 Profile  
 
Arthur
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: May 17th, 2008, 13:06 
Offline

Joined: October 4th, 2007, 12:07
Posts: 116
This is new family disks. Terminal connection pinout is the same as before. I'll give you a small hint: Everything is faster now :)
Top
 Profile  
 
shaun
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: May 18th, 2008, 18:33 
Offline

Joined: July 8th, 2006, 6:18
Posts: 222
How fast? It was 9600 in the past IIRC. What's up now? 38k4?
Top
 Profile  
 
pepe
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: May 19th, 2008, 0:24 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4755
Location: Hungary
There's not too many variations, U can try... :)

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
guru
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: September 23rd, 2008, 9:23 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
Well I have purchased a 7200.11 for some R&D :O) After looking at info related to these drives I am very excited by the control you can have over the diag port . Looks even easier than before!!!!!!!!!!!!!!!!

Well done Seagate for making a lovely terminal for us gimps

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
guru
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: September 23rd, 2008, 10:47 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
Just to be sure.. I don't have any of these drives yet ;o)

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
Starling
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: September 23rd, 2008, 12:07 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
guru wrote:
After looking at info related to these drives I am very excited by the control you can have over the diag port. Looks even easier than before!!!!!!!!!!!!!!!!

Well done Seagate for making a lovely terminal for us gimps

What are you smoking in cosmos? :)
Top
 Profile  
 
guru
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: September 23rd, 2008, 12:20 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
Pure Jamaican :O)

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: September 23rd, 2008, 14:01 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Hi ,
I Have the Same With Me ,will Like To Experiment And Tell You What and How It will work ,

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
guru
 Post subject: Re: Seagate 1T bytes terminal connection
PostPosted: September 24th, 2008, 4:26 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
Amarbir.. What have you found?

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot], msnirvana and 55 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group