Hi,

After a head swap on a Seagate 7200.10 ST3500630A i get the following in the terminal:

4096k x 32 DRAM
GALAXY - 1_Disk S-6D 09-22-06_15:48

Buzz HM SFI
!
ERR Read App Code

Then i try to read the code using the terminal commands, and this gives:

F>R
Code - A6 Track 15CC4.0.238 Sns FFF
F>j
ERR App Code incompatible SFL code


I tried with different boards, but i always get the same SFL error.

Anybody who can help ?

Thanks in advance,

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu

Application code has read errors or PCB is not original

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

ERR Read App Code from my experience is incompatible preamp

I used an identical drive, same partnr, same site code.
Only difference is patient has FW 3.AAD and donor 3.AAE but that should not be the cause.

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu

Did you write original ROM into donor's PCB?

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Hi Doomer,

I use the original PCB, since that has no problems.
However, this disk has been with another company before, and there is the writing "SPARE 160" on it. So i guess they changed the pcb.
I'm contacting my client so he can ask for the original pcb.

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu

sway bios to new boards

maybe you sway wrong head to bad-disk

I have same output in Terminal after issueing R and j, produces same output like yours.

PCB is original.
How to resolve this?


I have same T

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com