i have a fujitsu MHV hard disk,it has been set password,how to use PC3000-UDMA clera the passwrod? on adapter pc-2 card how to set jump ? and,how to use PC-FUJ.SATA?


hard disk interface:IDE

thanks!

Hi,
UDMA can't unlock some drives in that Fujitsu family...
I have one myself and have been talking to ACE about this and they didn't have any solution of it yet.
But you can try: No jumpers on the pc-card, test menu/Service information/work with SA/Security subsystem/Password erasing

Regards/ Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

Ask Atola, ACE, Salvdata and some others if they support (or will support) disable security on ALL MHV models, would be interesting to know.

clear password,i had been try it,this opreation can't remove the password

who can help me?!!

Copy module SU from a donor (unlocked) to the locked drive. Should do the trick.

Hi msurgeon,

Did you read what mr_spokk wrote ?

Some MHV drives can be unlocked with re-writing SU, some cannot
It depends of firmware revision

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Yes. I've successfully unlocked MHV2080AH with this method. I can't vouch for all MHV models.

Hi msurgeon,

As mr_spokk wrote some MHVs can allow typical read of SU and SM and quite a few MHVs do not.

thanks again

I will try it