View topic - maxtor 80gig need firmware

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

maxtor 80gig need firmware

Page 1 of 1

[ 13 posts ]

Previous topic | Next topic

Author

Message

saintvice

Post subject: maxtor 80gig need firmware

Posted: June 25th, 2009, 6:14

Joined: March 26th, 2009, 18:26
Posts: 20
Location: ghana

hi,
i am using salvation doctor and need firmware badly for

6Y080L043651
sn-Y2BQXLZE
code- YAR41BW0

Top

irs

Post subject: Re: maxtor 80gig need firmware

Posted: June 25th, 2009, 8:28

Joined: July 22nd, 2008, 5:04
Posts: 160
Location: Italy

Hi this model's firmware is present on the original firmware package provided with the hd doctor, if you don't have it you can download the .rar file from SD forum
bye
Luca

_________________
Data Recovery pro in Italy
www.ultrarecovery.com

Top

saintvice

Post subject: Re: maxtor 80gig need firmware

Posted: June 26th, 2009, 5:16

Joined: March 26th, 2009, 18:26
Posts: 20
Location: ghana

i did try but it doesnt seem to be working... when i try loading rom.. the drive clicks for a long white then gives an error....

Top

BlackST

Post subject: Re: maxtor 80gig need firmware

Posted: June 26th, 2009, 8:25

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

Oh...

1) bad method
2) bad loader/resource
3) the drive has head problems so any loader will make it click forever.
4) the drive has SA problems so the clicking.

Do you know how to work with CALYPSO drives ?

Top

derp

Post subject: Re: maxtor 80gig need firmware

Posted: June 26th, 2009, 8:50

Joined: May 6th, 2009, 5:28
Posts: 116
Location: Somewhere near UK

Sometimes even loader from same good working drive can make calypso click
on same good working drive.

You need to answer BlackST's question, first.

Top

saintvice

Post subject: Re: maxtor 80gig need firmware

Posted: June 26th, 2009, 9:19

Joined: March 26th, 2009, 18:26
Posts: 20
Location: ghana

no i dont...

Top

BlackST

Post subject: Re: maxtor 80gig need firmware

Posted: June 26th, 2009, 9:44

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

derp wrote:

Sometimes even loader from same good working drive can make calypso click
on same good working drive.

It is impossible : if the loader is built EXACTLY, it should work ALWAYS. If this happens you have... er... wrong software or there's something wrong out there

Top

saintvice

Post subject: Re: maxtor 80gig need firmware

Posted: June 27th, 2009, 3:48

Joined: March 26th, 2009, 18:26
Posts: 20
Location: ghana

k so under the boot management tab
i load a boot,then i load rom then load all mods... everything comes to ok... when i click hdd resset it starts clicking....
any ideas? someone mentioned the heads might be gone

Top

BlackST

Post subject: Re: maxtor 80gig need firmware

Posted: June 27th, 2009, 4:37

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

Check read channel, then proceed.

Top

saintvice

Post subject: Re: maxtor 80gig need firmware

Posted: June 28th, 2009, 19:25

Joined: March 26th, 2009, 18:26
Posts: 20
Location: ghana

read channel?

Top

BlackST

Post subject: Re: maxtor 80gig need firmware

Posted: June 29th, 2009, 0:54

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

Yes.

Top

irs

Post subject: Re: maxtor 80gig need firmware

Posted: June 30th, 2009, 8:15

Joined: July 22nd, 2008, 5:04
Posts: 160
Location: Italy

Hi, on sd products you can try head positioning or track positioning after loading rom and all mods + hdd reset.
For my experience if a loader doesen't work or you got the wrong one (different checksum) or you have other problems - heads or SA (damaged, bad sectors ulist ko ...) - may be you can try a C boot loader and check if you can read SA.
Bye
Luca

_________________
Data Recovery pro in Italy
www.ultrarecovery.com

Top

saintvice

Post subject: Re: maxtor 80gig need firmware

Posted: June 30th, 2009, 15:59

Joined: March 26th, 2009, 18:26
Posts: 20
Location: ghana

thanks irs..i'll try that

Top

Page 1 of 1

[ 13 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 57 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum