MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Previous topic | Next topic 
Author Message
felibo
 Post subject: PCB for WD800JD-75HKA1
PostPosted: July 28th, 2009, 16:33 
Offline

Joined: July 28th, 2009, 16:03
Posts: 59
Location: washington D.C
Any help in finding the pcb or used hdd for the hdd below would be very much APPRECIATED

WD800JD-75HKA1 80GB SATA
S/N: WMAJ95522049
Date: 20 sep 2004
DCM: DSBHCTJCH
LBA: 156250000
PCB #: 2061-001251-000-AH

Thanx
Top
 Profile  
 
pcimage
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 28th, 2009, 16:40 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
No offence, but why do you want a PCB?

What's up with the drive? Dead? Clicking? Burnt PCB?

Even if the PCB IS at fault, do you realise that another PCB WILL NOT WORK without at least the ROM information being transferred from the original?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
felibo
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 28th, 2009, 17:01 
Offline

Joined: July 28th, 2009, 16:03
Posts: 59
Location: washington D.C
PCB Burnt that is the reason for the pcb search.
For the donor pcb to work on the old hdd I would swap the FW chip.
That is the way to make the hdd visible in the bios.
Top
 Profile  
 
hddmania
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 28th, 2009, 18:23 
Offline

Joined: March 22nd, 2009, 0:19
Posts: 269
Location: behind the platter
What is the revision# on that PCB???
I have a lot of PCBs in stock for our data recovery use and some of them are over stocked. I can check...
Top
 Profile  
 
pcimage
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 28th, 2009, 18:27 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
felibo wrote:
PCB Burnt that is the reason for the pcb search.
For the donor pcb to work on the old hdd I would swap the FW chip.
That is the way to make the hdd visible in the bios.


Good, just checking as we get hundreds of noobs on here asking for a PCB to fix their drive as it's the easiest thing to change ,and they all hope that it will fix their drive when 9/10 times it won't!!! :-)

Yes, you are correct and would appear you know what you're doing.

I'll take a look in the morning to see if I have that PCB for you.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
felibo
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 28th, 2009, 18:49 
Offline

Joined: July 28th, 2009, 16:03
Posts: 59
Location: washington D.C
2060-001252-000 REV A
Top
 Profile  
 
Eric Lee
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 29th, 2009, 8:24 
Offline

Joined: April 25th, 2009, 11:42
Posts: 382
Location: China
felibo wrote:
2060-001252-000 REV A


Hi, I have this working PCB for sale, pls contact my hotmail.

Thanks
Eric

_________________
Provided HDD PCBs and donor HDD, Real in stock
eric_lee8341@hotmail.com
Top
 Profile  
 
jono-ats
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 29th, 2009, 8:59 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
I have a 2061-001252-090 AC from a WD800JD-00HKA0

_________________
http://www.datasaversllc.com
Top
 Profile  
 
rameez
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 31st, 2009, 13:23 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
I have too .
PCB #: 2061-001252-000-AH
Top
 Profile  
 
pcimage
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: July 31st, 2009, 14:16 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
The PCB from jono-ats shoud do the trick with a ROM transfer, plus in in U.S. too.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
felibo
 Post subject: Re: PCB for WD800JD-75HKA1
PostPosted: August 1st, 2009, 10:04 
Offline

Joined: July 28th, 2009, 16:03
Posts: 59
Location: washington D.C
pcimage

Help me out here, I have asked Jono-ats and Rameez for the price of the pcb 48hrs ago so far they have both cared not to send me a message if they have a price for the said item.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: ccc and 126 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group