MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
AOnD
 Post subject: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 22nd, 2009, 7:24 
Offline

Joined: September 15th, 2009, 7:19
Posts: 21
Location: Madrid
Hi everybody!

I think I've tried everything with this hdd, is a ST3500620AS with HP12 firmware.
I've tried with PC3000 the "HDD Lock (LED: 000000CC)" solution but is not working.
I've tried with commands in the terminal:
CTRL + Z
F3 2>Z
F3 2>U
F3 T3>/1
F3 1>N1
F3 1>/
F3 T>m0,2,2,0,0,0,0,22 Si no se queda en estado busy

With everything that I did apear with error:

Error 1008 DETSEC 0000500E Process Defect List Error

Somebody can help me?
Top
 Profile  
 
scratchy
 Post subject: Re: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 22nd, 2009, 9:51 
Offline
User avatar

Joined: August 9th, 2007, 8:40
Posts: 791
Location: United Kingdom
Send it to a pro.

The problem you have is that the drive does not respond to standard techniques for accessing terminal mode. You need someone that knows how to do this.

If you are in Madrid, you could PM dmarques who posts here regularly.

_________________
If you can keep your head when all about you are losing theirs, you probably don't fully understand the situation. ... Mr Kipling

https://www.mjm.co.uk/
Top
 Profile  
 
AOnD
 Post subject: Re: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 22nd, 2009, 10:26 
Offline

Joined: September 15th, 2009, 7:19
Posts: 21
Location: Madrid
[quote="scratchy"]Send it to a pro.

The problem you have is that the drive does not respond to standard techniques for accessing terminal mode. You need someone that knows how to do this.

That's why I asked this question. I've tried also changing the pcb and also hot swap. So ... do u know this not standard techniques for accesing to terminal mode? If u dont know, let's others to try to answer my question.

Thanks!
Top
 Profile  
 
scratchy
 Post subject: Re: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 22nd, 2009, 10:31 
Offline
User avatar

Joined: August 9th, 2007, 8:40
Posts: 791
Location: United Kingdom
I do know. I can fix these, as can dmarques. it is the method used to get the drive into terminal mode. the usual trick does not work the the HP, ES, DE and many other revisions of these drives.

If others do know and want to tell you, they will do so :)

_________________
If you can keep your head when all about you are losing theirs, you probably don't fully understand the situation. ... Mr Kipling

https://www.mjm.co.uk/
Top
 Profile  
 
BlackST
 Post subject: Re: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 22nd, 2009, 13:08 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Why not getting support having PC3000 ?
Top
 Profile  
 
AOnD
 Post subject: Re: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 23rd, 2009, 3:59 
Offline

Joined: September 15th, 2009, 7:19
Posts: 21
Location: Madrid
BlackST wrote:
Why not getting support having PC3000 ?


Ok, I will explain you, what exactly what i did:
1- The hdd is totally without ID HDD and without real capacity ,49MB (1 000)
2- If I put the "translation violation (0MB)" solution, then It's found the ID HDD, ST3500620AS, serial 9QM5LG8Z and firmware HP12; but capacity ()MB.
3- Then, If try the "translation violation (0MB)" solution is not working and also is not working the LED: 0000CC solution.
4- I tried the short-circuit solution of PC3K manual, but not working to unblocked the terminal, so I unbloked doing LED: 0000CC solution and press CTRL+Z
5- and then the code that I told you
Top
 Profile  
 
guru
 Post subject: Re: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 23rd, 2009, 4:39 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
you sound like an aresh0le.. why would anyone waste time helping you. Goto a pro or use the garbage

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
BlackST
 Post subject: Re: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 23rd, 2009, 8:59 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
If you read EXACTLY what the problem is, maybe.....
Top
 Profile  
 
AOnD
 Post subject: Re: Seagate 7200.11 Firmware issue: HP12 Firmware
PostPosted: September 24th, 2009, 5:20 
Offline

Joined: September 15th, 2009, 7:19
Posts: 21
Location: Madrid
BlackST wrote:
If you read EXACTLY what the problem is, maybe.....


I have two hdd ST3500620AS, P/N 9BX144-021 with error in the firmware 7200.11 HP12.

Both of them I can solve the ID, but in one of them I have an error in the Spin up, so I think the problem is the hdd motor. In the other the problem is the capacity "()MB" is shown. I could solved problem like that in many of hdd with this firmware with the pc3000, HP24, SD15, DELL...
I can't understand why in this one I have many problems to solve.

Thanks!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group