MAxtor 6E40LO
Serial E11QWEN
Firmware NAR61HA0
Problems:
I testetd SA with PC3K Udma the conclusion its:

Modules | Comment
----------------------------------------------------------------------------------------------
95 | HDD has errors not critical for its normal operation. But before
| copying user data you should switch off automatic adding of defects to
| the defect-list.
-------------------------------------------------------


>Read roadmap............................ : Ok
>Read roadmap extension.................. : Ok
>Read zone allocation table.............. : Ok
>Read Technological ID................... : Ok
>Read Zone allocation table extension.... : Ok
>SA head................................. : 3
>Ext Model............................... : 6E040L0711214C
>HDD has an alternate service area

I have testet SA writing test its OK

Problems:
the hdd its not recognized by bios
Not have acces to user data


At the xp utility mount the disk may Read/write operation count remain 0

Can you help????????????????

Can you attach the whole SA including groups on encrypted RAR or ZIP and PM the password ? (just for privacy)

If you start drive with loader, does it start or have problems i.e. late calibration ?

Checked the error lists (for trashed entries) and translator ?

I vote for MBR problem only.

This drive should apper in BIOS, i am sure.

J

If all modules are OK drive should detect and one more thing what model does it show in Pc3k.

Tank you for your suggestions, really has been damaged MBR.
I solved the problem with WinHex

good job.

_________________
data recovery service[/b]

Thank you