MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 36 posts ]  Go to page 1, 2  Next
  Previous topic | Next topic 
Author Message
TerraNova
 Post subject: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 2:40 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
I have seagate ST3500320AS unable to jump to terminal (yes i have tried setting baud rate to 38400 and Cntrl-Z), this drive is transition between Maxtor to Seagate. Inital startup drive is struggling and few noise not exactly clicking, unable to detect in PC3000 UDMA.

Any idea guys, thank you so much.
Top
 Profile  
 
thatdellguy
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 4:17 
Offline
User avatar

Joined: August 19th, 2007, 17:30
Posts: 1898
Location: In your hard drive.
Can you access terminal with the pcb off the hard drive?

_________________
Buy your friends Toshiba\Hitachi and your enemies Seagate.
Top
 Profile  
 
TerraNova
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 5:39 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
hi dell, no
Top
 Profile  
 
Mikippp
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 7:58 
Offline

Joined: May 30th, 2005, 17:07
Posts: 542
Hi,
ST3500320AS - 7200.11

BaudRate=38400 [38400,No,8,1]

Online commands:
Ctrl+A, Ctrl+L -> (PCB+HDA or PCB only!)
Ctrl+U ... -> (PCB+HDA)

ROM is 512kB, and many informations are stored in ROM...

Mikippp

Code:
RequestResumeSaveSmartFrame
F3 T> [Ctrl+Z]

F3 T> [Ctrl+A]
Package Version: MS0100.SDD2.AD090B.SD25    , Package P/N: 100504083, Package Builder ID: 3K,
Package Build Date: 01/16/2008, Package Build Time: 16:26:59, Package CFW Version: MS01.SDD2.00052452.3K00,
Package SFW1 Version: B000, Package SFW2 Version: C0FE, Package SFW3 Version: C0FA, Package SFW4 Version: ----
Controller FW Rev: 01161626, CustomerRel: SD25, Changelist: 00052452, ProdType: MS01.SDD2, Date: 01/16/2008, Time: 162659, UserId: 00000761
Servo FW Rev: C0FE
RAP Format Rev: 0092, Contents Rev: 15 05 10 06

F3 T> [Ctrl+L]
TetonST 2.0 SATA Moose Gen 3.0 (RAP fmt 10 ) w/sdff (RV )
...
...
...


F3 T> [.]
Current R/W User LBA 00000000 LLL CHS 000000.0.0000 PLP CHS 000000.0.0000
R/W Status 1 R/W Error 00000080 Ready


F3 T> [;]
This command is no longer supported.
Use the Online Control-L command instead.
Top
 Profile  
 
BlackST
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 10:01 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Bad SA so the weird noise ? Is that noise similar to "white noise" , like a hiss ?
Top
 Profile  
 
TerraNova
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 10:35 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
thanks Mikippp, BlackST ,it sounds like the heads are trying to calibrate and making very faint clicks then DRY and DSC but unable to id.
Top
 Profile  
 
BlackST
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 14:25 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Is sa full ok? How can it go rdy with bad sa?
Top
 Profile  
 
TerraNova
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 21:59 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
hi BlackST , that puzzled me too, it goes RDY but unable to check anything.
Top
 Profile  
 
darkforce1
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 22:02 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
most of the terminal command in 7200.11 are changed.

i have found some clues but still working on it.

DF :)

_________________
DF :)
www.datatracksystem.net
Top
 Profile  
 
quasimodo
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 22:53 
Offline

Joined: October 23rd, 2006, 8:56
Posts: 1336
Hi TerraNova,

I think you have ROM corruption!
I have exp. same problem few weeks ago.
Top
 Profile  
 
Doomer
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 23:27 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
quasimodo wrote:
Hi TerraNova,

I think you have ROM corruption!
I have exp. same problem few weeks ago.

There are two incompatible things: ROM corruption and 7200.11 drive in ready state :)
That's definitely not ROM corruption I would say it's heads or motor problem

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Last edited by Doomer on August 8th, 2008, 23:31, edited 1 time in total.

Top
 Profile  
 
TerraNova
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 23:27 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
hi quasimodo, i will check it out thanks, if it is corrupted what do i do? find identical rom?
Top
 Profile  
 
Doomer
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 23:32 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
TerraNova wrote:
find identical rom?

good luck with that. I have serious doubt in that probability :)

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
quasimodo
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 23:41 
Offline

Joined: October 23rd, 2006, 8:56
Posts: 1336
Doomer,

I can uderstand why you are saying It could be weak heads, but why do you think it's motor?
Top
 Profile  
 
quasimodo
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 8th, 2008, 23:49 
Offline

Joined: October 23rd, 2006, 8:56
Posts: 1336
TerraNova,

I can only speak for my case, Doomer is certainly more experienced then I am, and the problem could of course always be something else like heads.
Recently I was experimenting with allot of different drives and created allot of defects and malfunctions for testing purposes. With this drive I edited ROM content. I only changed 4 or 6 bytes and the symptoms that you are experiencing are exactly the same ones that I had after corrupting the ROM.
After I restored the original data to the ROM it worked perfectly again.
Therefore I gave my above comment.
Top
 Profile  
 
Doomer
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 9th, 2008, 13:46 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
quasimodo wrote:
Doomer,

I can uderstand why you are saying It could be weak heads, but why do you think it's motor?

There were some drives exactly ST3500320AS model and they had motor problems, sound was as described in this topic

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
BlackST
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 9th, 2008, 14:54 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
@doomer, please explain : motor problems mean motor running with noise or unstable bearing so platter vibration ? (Just curious, don't have many seagates here and the ones around seem not to fail more than expected)
Top
 Profile  
 
Doomer
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 10th, 2008, 0:07 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
BlackST wrote:
@doomer, please explain : motor problems mean motor running with noise or unstable bearing so platter vibration ? (Just curious, don't have many seagates here and the ones around seem not to fail more than expected)

I beleive it's both, as I remeber it was necessary to make platter transplant
In this particular case I would start with heads checking to understand the condition of original heads
Bad thing is such drives is pain in the ass concerning heads xplant :(

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
TerraNova
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 10th, 2008, 0:27 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
Thank you all for participating in this,
Hi Doomer how to check the head if no access to terminal? SWAG? Simply Wild Ass Guess? :D FYI the drive is not vibrating violently, it is normal, so i assumed motor problem is eliminated, i have inspected the top platter no problem, i even looked at the magnetic heads under scope and they looked good no obvious sign of scatches.

Quasimodo, how do you alter the ROM? manually download using rom reader and edit it? or using pc3000? I cant even access ROM using pc3000.

Thanks all.
Top
 Profile  
 
quasimodo
 Post subject: Re: Seagate ST3500320AS unable to jump to terminal
PostPosted: August 10th, 2008, 1:40 
Offline

Joined: October 23rd, 2006, 8:56
Posts: 1336
check pm :D
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 36 posts ]  Go to page 1, 2  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group